Quelltext der Seite 2,4'' 240x320 LCD Touch Display an NodeMCU

Quelle [http://nailbuster.com/?page_id=341]

* Hardware SPI wird verwendet
* ILI9341 display controller
* XPT2046 touch controller

 Display: KMRTM24024-SPI, 2.4 TFT SPI 240x320 ILI9341
 
 T_IRQ   ---------- Touch interrupt --------------------------- D1
 T_OUT   ---------- Touch SDO(MISO) Serial Data Out ----------- D6 Hardware SPI MISO
 T_DIN   ---------- Touch SDI(MOSI) Serial Data In ------------ D7 Hardware SPI MOSI
 T_CS   ----------- Touch Chip Select ------------------------- D2
 T_CLK   ---------- Touch SCK Serial Clock -------------------- D5 Hardware SPI Clock
 SDO(MISO)   ------ Serial Data Out / Datenausgang ------------ D6 Hardware SPI MISO
 LED   ------------ Hintergrundbeleuchtung --------------------    3V
 SCK   ------------ Serial Clock / Takt ----------------------- D5 Hardware SPI Clock
 SDI(MOSI)   ------ Serial Data In / Dateneingang ------------- D7 Hardware SPI MOSI
 D/C   ------------ SPI data or command selecting ------------- D4
 RESET   ------------------------------------------------------    3V
 CS   ------------- Chip Select ------------------------------- D8 Hardware SPI Chip Select
 GND   ------------ Ground ------------------------------------    GND
 VCC   ------------ +3 V --------------------------------------    3V

                                                               NodeMCU V3 ESP8266